The Earfull August 17, 2026

Late-Season Clues, Next-Season Answers

By late August, the crop is beginning to show us what is working and what did not. The challenge is that many of those clues become harder to interpret once leaves dry down, equipment starts running, and harvest activity takes over.

This week is a good time to move beyond the simple question, “How good does this field look?” Instead, start asking: “What is causing field variability, and what can these differences teach us before next spring?”

Corn: Capture the Patterns Now

In corn, the differences are often becoming easier to see. A field may appear uniform from the road while still containing distinct zones with shorter plants, lower ear placement, early dry-down, weaker color, or visibly thinner stands.

Those patterns rarely happen by accident. They can point back to soil texture, compaction, drainage, residue distribution, planting conditions, uneven emergence, nutrient availability, or rainfall timing.

This is not the week to build another yield estimate. The better use of time is to identify the zones worth explaining after harvest.

A few simple actions can pay off:

  • Drop pins or take geotagged photos of areas that are finishing early or under stress.
  • Note recurring headland, sidehill, sand ridge, or low ground patterns.
  • Flag fields where a strong-looking crop changes sharply within a short distance.
  • Identify whether weaker areas match old drainage issues, traffic patterns, or known soil changes.
  • Save drone imagery or field photos before maturity makes the entire field look similar.
  • The goal is to give harvest data some context. A low-yield area is much more useful when it is accompanied by field observations.

Soybeans: Watch for Uneven Finish

Soybeans often hide variability until later in the season. By now, differences in canopy height, maturity, pod load, weed pressure, and green stem risk can help separate a one-time issue from a repeatable field pattern.

Pay attention to fields where maturity is noticeably uneven. Some variation is expected, but broad or recurring zones can reveal more about the field than a whole-field average ever will.

Look for places where:

  • Plants are shorter or thinner in a consistent pattern.
  • Weed escapes line up with weak canopy development.
  • Wet areas remain green longer than surrounding acres.
  • Early-maturing areas follow lighter soils or shallow ground.
  • Lodging risk or uneven drydown may affect harvest timing.

A quick note now can prevent a lot of guessing later. When yield maps are available, those notes help distinguish whether a poor zone was driven by weather, soil, traffic, drainage, population, or another manageable factor.

Make Harvest Data Better

Yield maps are only as valuable as the data going into them. Before harvest begins, take a few minutes to make sure monitors are calibrated, field boundaries are correct, and operators know where to pause or flag unusual conditions.

Clean yield data can become a strong decision tool when it is compared across years. Repeated low-yield areas deserve a different conversation than areas that only struggle in a dry year, wet year, or under a specific crop.

This fall, focus on building a short list of questions—not a long list of assumptions:

  • Which zones perform well consistently?
  • Which zones are consistently below the field average?
  • Which areas are variable depending on weather?
  • Where should soil sampling, drainage review, compaction checks, or population decisions begin?
  • Which fields deserve an on-farm trial in 2027?

References

  • USDA National Agricultural Statistics Service, Crop Progress, August 3, 2026.
  • North Dakota State University Extension, Site-Specific Farming: Yield Mapping and Use of Yield Map Data.
  • Iowa State University Extension and Outreach, Plan Ahead to Minimize Soil Compaction During Harvest

The Earfull August 10, 2026

What the Ears Are Saying

Corn pollination has moved from “about to happen” to “already in the rearview” on a lot of acres. From the road, many fields still look strong. The real story now is on the ears themselves. The key three questions:

  • Did this field actually pollinate well?
  • Where are the weak spots hiding?
  • How do we turn today’s ears into a useful yield and management conversation for fall?

The right time to look is…

  • Tassels are mostly done or nearly done shedding.
  • Silks have turned brown and are starting to dry down.
  • You’re roughly 5–10 days past peak tassel in that field.

The fields that might be the best to pull into the driveway and see what the ears are saying: 1) Fields that hit tassel during a hot, dry stretch; 2) Lighter soils, compacted ends, and uneven zones that rolled early;
3) Later‑planted fields that just wrapped pollination under a different weather pattern. Then you will know which fields look good with ears that back that up—or don’t.

corn cobThe ear silk shake test simple, quick, visual

You don’t need a complicated procedure to grade pollination. The straightforward shake test that works well in the field. It takes about 30 seconds per ear and gives you a clear picture.

  • Walk 50–100 feet in and pull 3–5 plants in a row.
  • Choose ears where silks are mostly brown and dry.
  • With a sharp knife, slice the husks from butt to tip and peel them back, leaving silks attached.
  • Hold the ear horizontally and gently shake it.

corn cob with silkWatch what the silks show you. Silks that fall away are tied to fertilized kernels. Silks that stay stuck mark ovules that never got pollen. You don’t need a chart. Your eyes do the work.

As kernels move deeper into grain fill, it’s worth taking a second look at ears you checked earlier in pollination and see how they’re actually filling out. A little “tip‑back”—a short, blank section at the very end of the cob—is common and can come from either late silks that never caught pollen or from the plant quietly aborting the youngest kernels when it doesn’t have the energy to finish them. What deserves more attention is how that poor fill shows up. If the blank area is limited to the last half‑inch or so at the tip, the field may still be in good shape. When blank space or shriveled, aborted kernels start marching further down the ear, or when you see entire rows missing along one side of the cob—the classic “zipper” pattern—this points to more serious stress during early grain fill. In those cases, the plant set kernels but later ran short on photosynthate due to drought, heat, nutrient limitations, or heavy disease pressure, and it shed part of the load to protect the remaining kernels.

Turning ears into a yield range

What is the yield of this field? Here is a basic method to calculate the range:

  • In 30‑inch rows, measure a row length of 17’ 5” (1/1000 acre).
  • Count the harvestable ears in that stretch and multiply by 1,000 for ears per acre.
  • Count kernels per ear (# of kernel rows × # kernels length) – only count actual kernels—skip blank cob and severely aborted tips.
  • Yield (bu/ac) ≈ (ears/acre × kernels/ear) ÷ 85,000–95,000. Use around 85,000 if the crop is healthy and kernels look like they’ll fill well; use closer to 95,000 if stress has obviously thinned or shortened them.

Soybeans: pod set check, not pod count marathon

soybean plant with pods

While we’re focused on ears, soybeans are quietly making their own big decisions. Many fields are in full pod to early seed (R3–R5). This is when beans decide how many pods to keep and work on how full those pods will be.

You don’t have to count every pod to learn something useful. Three quick questions in beans:

  1. How is pod load spread up the plant? Walk the row and pull a few plants. Look for pods building from mid‑canopy into the upper third of the plant. A good plant usually has pods stacked on most nodes, not just at the bottom.
  2. Where are pods being shed? Some flower and tiny pod drop is normal; beans use it as a safety valve.
    The worry point is heavy pod loss up top or on branches that line up with late-season stress—
    heat, drought, or disease.
  3. What could trim seed size from here? Dense canopies, warm nights, and sticky mornings are great for disease. Fields with a history of white mold or SDS deserve closer attention as we move deeper into pod and seed fill.

Recent soybean growth‑monitoring work reinforces a simple truth. What happens in August can push you from “average” to “better than expected,” or quietly shave a few bushels off the top.

References

  • University of Wisconsin–Madison Extension. “Concerns about Drought as Corn Pollination Begins.” Wisconsin Corn Agronomy.
  • Purdue University Agronomy. “Estimating Corn Grain Yield Prior to Harvest.”
  • Iowa State University Extension and Outreach. “Corn Yield Estimates.” Integrated Crop Management.

The Earfull July 27, 2026

When Heat Stops Being “Just Weather”: Stress Degree Days, and Warm Nights

aerial of corn field

By late July, most growers expect some heat. What we are seeing now across much of the Renk footprint is more than that – it’s an extended stretch of high temperatures, sticky nights, and another strong ridge of high pressure building for the week across much of our area.

The crop has already worked through one major heat wave earlier this month. Now parts of the western and central Corn Belt are stacking another round of highs in the 90s and warm overnights as corn moves deeper into grain fill and late pollination pockets finish up. This week’s EARFULL focuses on when that heat stops being “just weather” and starts becoming measurable stress in the form of Stress Degree Days (SDDs), what warm nights over 70°F are doing inside the plant, and how to think about this week’s forecast for both dryland and irrigated acres.

Stress Degree Days:

Earlier issues have talked about heat and humidity around tassel and how corn manages stress by moving water. SDDs give us a simple way to measure how often the crop has been pushed past its comfort line.

For Midwest corn, 86°F is the key threshold. Each day the high exceeds 86°F, the “extra” degrees above 86 are added to a running SDD total. Iowa State work showed that under typical rain‑fed Iowa conditions, corn reaches incipient water stress more than half the time when air temperatures hit 86°F.

This matters because long‑term yield work suggests that when seasonal SDD totals stay below roughly 140, many rain‑fed crops can still finish at or above trend yield. Once totals push beyond that 140 mark, it becomes “tough to find corn yield above trend,” even with solid management. Your recent heat‑stress analysis shows some locations already carrying 80–90 SDDs, with another 50‑plus units possible if next week’s high‑pressure ridge holds together, which would move portions of the western and central Corn Belt into or past that 140‑SDD zone.

The main agronomic message is simple: isolated hot days are not the story anymore. The story is accumulated stress.

Warm Nights:

The other half of this heat stretch and the part growers often feel most is warm nights.  The corn plant runs day and night. During daylight, plants make sugars; around the clock, they burn some of those sugars through respiration. High nighttime temperatures in the 70s and 80s increase respiration, which means more of the day’s sugars get burned off instead of ending up in kernels. Extension and industry summaries emphasize that above‑average night temperatures during reproductive growth can reduce yield by cutting both kernel number and kernel weight.

Overnight lows staying near or above 70°F for several nights in a row mean the crop is never fully resetting. Plants are starting each day with less cushion, which raises the odds that the combination of high daytime SDDs and warm nights quietly trims grain fill, even in fields that still look reasonable from the road.

Dryland vs. Irrigated:

The next ridge of high pressure will not treat all fields the same. The difference between dryland and irrigated acres is not whether they will feel hot – it is how much margin they have to ride through it.

In rain‑fed systems, SDD totals and warm nights are strong signals that the crop’s stress budget is tightening. As SDD totals approach or cross the 140 mark, long‑term data says it becomes much harder to finish above trend yield unless the field has had unusually good moisture luck. Fields that already rolled hard in earlier heat, carry shallow roots, or sit on lighter soils are the most vulnerable as this next ridge sets in.

Irrigation changes how plants experience the same air temperature. A full soil profile allows corn to keep stomata open longer, maintain transpiration, and keep the canopy cooler internally even when air temperatures exceed 86°F. That means irrigated fields generally tolerate higher SDD totals before showing the same level of yield penalty, because water is available to support photosynthesis instead of forcing the plant to shut down.

However, irrigation does not fully erase the impact of warm nights. Canopy cooling from irrigation is helpful, but it does not pull nighttime air temperatures back out of the 70s and 80s. Respiration “tax” from warm nights still applies under irrigation, so kernel weight can still be trimmed in sticky night patterns – just usually less severely than in fields that are stressed for moisture.

What to Watch:

Given the forecast for another strong ridge and high‑heat pattern across much of the region, the best use of scouting time over the next 7–10 days is to sort fields by stress response rather than by headline temperatures.

Watch warm nights as closely as highs. Note fields where overnight lows stay above 70 °F for several nights in a row, especially where pollination is wrapping up and grain fill is underway. Those are the acres most likely to see subtle yield drag from respiration even if daytime stress looks manageable.

Separate dryland and irrigated risk. On dryland, focus on lighter soils, uneven emergence pockets, and fields with shallow rooting that already showed stress earlier in the month. On irrigated acres, focus on timing and adequacy of sets around tassel and early grain fill; fields that slipped behind in irrigation timing may show more kernel number loss than neighbors.

References

  • Iowa State University Extension and Outreach. “Water Stress in Corn: Estimating from Stress Degree Days (SDD).” Integrated Crop Management.
  • Midwestern Regional Climate Center / Purdue University Extension. “About the Modified Stress Degree Day Product for Corn.”
  • Ohio State University Agronomic Crops Network. “Hot Night Temperatures Can Decrease Corn Yield.”

The Earfull July 20, 2026

As Fungicide Season Moves from Discussion to Decision

Across much of the Renk sales area, fungicide season in corn and soybeans is no longer a planning conversation. It is an active decision window. Some acres are already being sprayed. Others are being watched closely as fields move into tassel, early silking, flowering, and beginning pod. That makes this a good week to simplify the discussion. The question is not whether fungicides can work. The question is where they still fit, what conditions deserve quicker action, and which acres should probably not be forced into a pass just because the calendar says it is fungicide time.

This also feels like one of those weeks when general disease talk can outrun actual field conditions. That usually happens when the topic is timely and the crop is entering a sensitive stage. A better approach is to sort fields by crop stage, disease pressure, field history, and remaining yield potential. When those pieces line up, fungicide can still be one of the in-season management tools. When they do not, the recommendation gets harder to defend.

drone spraying

Corn

Corn should still get the first look in many geographies because a lot of acres are entering or approaching the highest-value fungicide window right now. The long-standing emphasis has been that the main leaves worth protecting are the ear leaf and the leaves above it, because those leaves contribute roughly 75 to 90 percent of the carbohydrates needed for grain fill. This is one reason tassel through early silking remains the practical decision window in so many agronomy conversations.

Start scouting immediately prior to tasseling. Check lower leaves up through the ear leaf. If disease is not present below the ear leaf, a fungicide application may not be warranted, and weekly scouting may be a better move than reacting too early. That fits the broader Midwest reality well. Fungicides are not especially forgiving when they are applied too early, and most products are effective for only about 14 to 21 days. Since corn still has a long stretch from silking to maturity, early sprays can lose value before the crop reaches its most important grain fill period.

A few corn checks matter right now

  • Confirm actual crop stage by field, not just by windshield appearance.
  • Start with corn-on-corn, higher-residue, and more disease-prone hybrid situations first, because those fields carry more foliar disease risk in a typical Midwest system.
  • Watch whether lesions are staying well below the ear leaf or beginning to move into the part of the canopy that matters most during grain fill.
  • Keep the duration of protection in mind. A spray made too early may not still be carrying enough activity when disease risk matters most.

Be realistic about field potential. Fungicide protects stronger corn better than it rescues stressed corn.

The main point in corn is still discipline. It is easy to talk a field into a fungicide application when disease discussion gets loud. It is more useful to ask whether the field has the disease setup, crop stage, and yield potential that give the pass a reasonable chance to return.

drone spraying

Soybeans

Soybeans deserve the same kind of discipline, even if the conversation usually trails corn.  Across much of the region, the key soybean question is whether fields are moving into the R3 window with enough disease risk and enough yield potential left to justify a fungicide trip. That is usually a better question than simply asking whether fungicide is being applied nearby.

That matters in soybeans because fungicide decisions are often influenced by habit. A clean-looking field can still be treated because the operation usually sprays beans at a certain stage. But resistance-management principles argue for a more selective approach. Tank mixes with different modes of action, avoiding reduced rates, and keeping applications tied to real disease pressure are all part of protecting chemistry performance over time.

A few soybean checks matter right now

  • Focus first on fields nearing the main reproductive fungicide window and with a history of foliar disease pressure.
  • Prioritize fields where canopy density, field history, and longer periods of leaf wetness are more likely to support disease development.
  • Keep scouting consistent enough that fungicide decisions are tied to incidence and severity, not just to habit or timing on the calendar.
  • Avoid reduced rates and avoid leaning on the same mode of action repeatedly, especially where multiple passes are being discussed.
  • Treat fungicide as a crop-protection tool, not an automatic bonus-bushel pass.

Soybean fungicide can still fit very well in the right fields. The better message this week is simply to stay selective. Build the recommendation from disease threat, field history, and crop stage rather than from routine alone.

What likely happens next

For the next seven to ten days, fungicide activity will likely remain in corn and continue to build in soybeans as more acres move into the reproductive window. The strongest near-term fit should remain in corn fields at tassel or early silking where foliar disease is present or likely to move into the upper canopy. Soybean decisions will stay more variable from one field to the next because disease development is often less uniform and stewardship matters more when pressure is not yet obvious.

This is why the most useful agronomy conversations right now are still the simpler ones. Rank fields. Confirm stage. Revisit field history. Decide where disease risk is real. Protect the acres that still have clear yield to defend. Then avoid turning fungicide timing into a routine trip in fields that don’t show enough evidence to support it.

References

  • Before applying fungicides to corn: Stop! Look! Consider! — ear leaf protection, scouting before tassel, 14 to 21 day activity, corn-on-corn risk, and economics of fungicide use — Iowa State University Extension — crops.extension.iastate.edu
  • Fungicide resistance management in corn, soybean, and wheat in Wisconsin — FRAC groups, resistance risk, scouting-based field history, alternating modes of action, and avoiding curative or reduced-rate use — University of Wisconsin Extension — corn.agronomy.wisc.edu
  • Before applying fungicides to corn: Stop! Look! Consider! — hybrid susceptibility, disease position in the canopy, and why timing matters more than simply being early — Iowa State University Extension — crops.extension.iastate.edu

The Earfull July 13, 2026

When Corn and Soybeans Start Making Their Own Weather

In a lot of areas, the air does not just feel hot. It feels heavy. Part of that is the weather pattern itself, but part of it is the crop. As corn and soybean canopies move large amounts of water from the soil, through the plant, and out into the air, they help create the sticky field conditions many scouts are walking into this week.

That matters because a hot, humid stretch is not only a comfort issue for people in the field. It is also a real test of how efficiently plants can keep moving water, keep tissues cool, and hold reproductive timing together as corn reaches tassel and soybeans edge deeper into flowering.

corn row

Corn is entering the key window

The main agronomic issue is not simply that highs may reach around 95-100 degrees. The bigger issue is that much of the crop is entering pollination, with some acres just beginning pollen shed and others likely several days into it. The forecast favoring above-normal temperatures across most of the country can be impacted by this growth stage. Here’s why.

Corn has one main way to manage heat: move water. When soil moisture and root function are still adequate, the plant can keep transpiring, which helps cool the canopy and supports continued silk growth and pollen movement. When that water pipeline starts to tighten, the plant shifts quickly from managing heat to conserving moisture, and that is when stress becomes more visible in the field.

This helps explain why two fields with similar calendar dates can respond very differently in the same weather pattern. Deeper soils, stronger rooting, and more even early-season development can give one field enough buffer to move through a hot week with modest impact, while lighter ground or compacted areas may begin to roll early, shorten silk growth, and raise concern about kernel set.

Humidity is an important part of this story. High humidity can reduce atmospheric demand compared with a hot, very dry wind event, but it also reflects how much water the crop is already pushing into the air. In other words, the same humidity that makes the day feel oppressive can also be a sign that the crop is working hard to cool itself.

The practical question is whether fields can keep that cooling system running through pollen shed. If plants still have access to moisture, the crop can often ride through several warm days. If moisture supply slips, especially on lighter soils or in uneven parts of fields, stress can show up first in delayed silk emergence, extended leaf rolling, and greater variability from one ear to the next.

What to watch during pollen shed

This is a good week to shift scouting from general appearance to reproductive function. A field can still look decent from the road and be less synchronized than expected once you move beyond the ends and start checking tassels, silks, and plant response through the middle of the day.

A few checks matter right now:

  • Confirm actual pollen shed timing by field instead of relying on tassel visibility alone. A field that has tasseled is not necessarily shedding uniformly yet.
  • Watch how early leaf rolling begins and how long it lasts. Brief afternoon rolling is different from leaves tightening by late morning and holding most of the day.
  • Check silk emergence across multiple management zones, especially lighter soils, compacted areas, and places that ponded earlier in the season.
  • Pay attention to warm nights. Limited nighttime recovery can leave plants starting the next day with less margin than they had before.

A useful way to describe this week’s risk is this: heat by itself is not automatically a yield loss story, but heat during pollen shed can become one quickly if it overlaps with uneven moisture supply or weak silk progression. That is why this stage deserves more than a windshield check.

soybean row

Soybeans are helping create the humidity, too

Soybeans are not at the same make-or-break stage as pollinating corn, but they are still part of the heat story. Many bean fields are building canopy, moving into flowering, and transpiring heavily, which contributes to the damp, heavy air many people are noticing around productive fields.

This does not mean soybeans are carefree under these conditions. If moisture remains available, beans can usually handle short stretches of heat better than corn and still retain strong yield potential. But warm nights, dense canopies, and prolonged humidity can raise respiration costs and increase the chance that disease risk starts to build in fields with a history of foliar pressure.

Soybeans also remind us why broad crop ratings only tell part of the story. A statewide number can look stable while individual fields differ sharply based on planting date, canopy closure, weed competition, compaction, and rainfall luck over the last few weeks.

Field reality over headline reality

Markets have been reacting to weather concerns, and forecasts continue to keep traders focused on the pollination window. That attention makes sense, but the best agronomic read this week still comes from separating field classes by actual stress response instead of by headline intensity.

References

The Earfull July 6, 2026

As We Head into the First Full Week of July

corn row

This week’s EARFULL takes a step back from the noise and looks at what early July heat and humidity mean for pollination, how to think about good-to-excellent crop ratings, and what is worth scouting in your own fields over the next 10 to 14 days.

Early July heat

Forecasts point to a hot, humid start to July across much of the central and eastern United States. Not to overstate it, but heat index values frequently topping 100 degrees and warm nights offering limited recovery. That lines up with what many growers are seeing in the field as corn begins to show stress faster on lighter soils and more exposed ground.

From an agronomy standpoint, the key questions are timing and duration. Corn is most vulnerable when high heat overlaps the pollination window, especially when nights stay warm and soil moisture is already drying out. A brief burst of heat with decent subsoil moisture is usually a stress test. A longer stretch of heat, wind, and limited rainfall is when real concern starts building around kernel set.

A few field checks matter this week:

  • Flag fields that are within 10 days of tassel and already showing stress on lighter soils.
  • Monitor overnight lows alongside daytime highs, as warm nights reduce crop recovery.
  • Note when leaf rolling begins. Corn that rolls by mid-morning and stays there all day is signaling that the moisture profile is getting short.

The goal is not to overreact to a single hot forecast, but to identify which fields could become vulnerable if the pattern holds.

Crop condition

USDA reporting showed U.S. corn with 67 percent rated good to excellent and soybeans at 65 percent good to excellent as of late June. This reflects generally favorable conditions across much of the Midwest, helping explain why market commentary can sound calm even while individual farms are dealing with drowned-out spots, uneven stands, or short-term moisture stress.

Both views can be true at the same time. Broad ratings capture the region, but they do not highlight field-to-field variability. University and federal climate resources for Midwest agriculture also point to greater weather variability and uneven rainfall patterns as ongoing management challenges for corn and soybean systems.

That makes local field evaluation more valuable than ever. Scouting tips at this critical stage:

  • Walk beyond the end rows before judging stand and vigor.
  • Rate fields as solid, borderline, or concerning based on stand, color, root development, and soil moisture.
  • Pay close attention to areas that either ponded in June or consistently missed rainfall, because those zones may react very differently under this early July heat.

By early July, field reality usually tells more than a statewide average.

Soybeans still have runway

Soybeans have generally progressed well so far this season, and early condition ratings have stayed favorable in many key states. This has encouraged some early-season optimism, but soybeans still have a long way to go before final yield is set.

Beans can compensate better than corn if they catch moisture during flowering and pod set, but they remain sensitive to stress during reproductive development. Iowa State’s late-June regional crop update noted that soybeans were generally in the V3 to V5 range while much of the corn crop was in the V5 to V7 window, reinforcing that both crops were still moving through important vegetative stages heading into July.

A practical soybean checklist for the next two weeks includes:

  • Check growth stages in the fields carefully so you know which acres are moving into flowering under stress.
  • Prioritize weed escapes, especially where late competition can rob moisture and sunlight.
  • Watch denser canopies, where continued humidity could raise disease risk.

Strong-looking beans in late June are encouraging, but they are not a finished crop.

As the calendar turns into July, the conversation should stay centered on timing. Heat alone does not necessarily mean yield loss, and strong early ratings do not guarantee the rest of the season. Pollination, flowering, soil moisture, and field variability are the real story right now.

The best move this week is simple: scout the fields closest to tassel and first bloom, sort them by risk, and keep separating general talk from field-specific reality. This approach usually leads to better agronomy decisions than reacting to the loudest headline.

References

The Earfull June 29, 2026

Disease Triangle Building in Corn

tar spot on corn leaf

Corn disease risk is starting to organize around the classic disease triangle: a susceptible host, active inoculum, and favorable weather. In 2026, that conversation centers on tar spot first, with northern corn leaf blight, gray leaf spot, and other residue-driven foliar diseases also worth watching as more acres move toward rapid canopy closure and the pre-tassel period.

Tar spot has already been confirmed at low levels in parts of the region this season, which means inoculum is present. Fields with a previous history should move higher on the scouting list.

The weather setup over the next two weeks adds another layer of concern. The latest Climate Prediction Center outlook favors above-normal temperatures across much of the Corn Belt, while above-normal precipitation is favored across much of the Upper Midwest and Great Lakes region. This combination does not automatically mean a disease outbreak. It does increase the odds that leaf wetness, canopy humidity, and repeated moisture events begin to support disease development in the fields that already have the rest of the triangle in place.

Disease Triangle: Why This Matters Now

The disease triangle remains the simplest and best framework for making disease decisions in corn.
Disease pressure only builds when three pieces overlap:

  • A host that can be infected.
  • Inoculum present in or near the field.
  • Weather favorable enough to support infection and spread.

In most Renk geographies, the host is already there, and the inoculum is no longer theoretical. For tar spot and northern corn leaf blight in particular, residue and local history matter. The swing factor in late June is weather, especially repeated rain, long dew periods, humidity, and canopy moisture that keeps leaves wet into the morning hours.

Tar spot is the disease drawing the most attention because it can move quickly once conditions turn favorable. Extension guidance for 2026 continues to emphasize that current early-season detections are low-incidence and low-severity. This is not a signal to make blanket fungicide applications on vegetative corn. That distinction matters. The right takeaway is not “spray now.” The right takeaway is “know which fields deserve tighter scouting intervals.”

What Could Be on Deck

Tar spot

Tar spot should remain the lead watch-out over the next two weeks. Heavy emphasis is on fields with a history of the disease, continuous corn, heavier residue, irrigation, or longer periods of canopy wetness. University guidance this season notes that findings have been at low incidence and severity in early vegetative corn, and that fungicide applications at these stages have generally not been economical. That means the practical response is targeted scouting and field ranking, not automatic treatment.

Northern corn leaf blight

Northern corn leaf blight warrants attention in fields with high residue and less-forgiving hybrids. It tends to move more effectively when leaf surfaces stay wet and humidity remains elevated. This is especially true as the crop approaches tassel and the canopy begins to hold moisture longer. If the coming pattern delivers repeated moisture without fast drying, this disease can move from background concern to active management discussion.

Gray leaf spot and other foliar disease pressure

Gray leaf spot remains on the “watch list” when warm, humid weather combines with residue and dense canopy conditions. It is rarely about one factor alone. It is usually the combination of field history, environment, and crop stage that determines whether disease remains cosmetic or begins threatening upper-canopy leaf area. The same logic applies to other common foliar diseases that can build when extended humidity and residue are part of the system.

What to Do Right Now

For the next two weeks, the highest-return management step is field prioritization.
Start with the fields most likely to move first:

  • Corn-on-corn acres
  • Fields with known tar spot or foliar disease history
  • High-residue situations
  • Irrigated fields or fields with prolonged overnight wetness
  • Denser canopies that are beginning to hold humidity
  • Acres approaching tassel sooner than the rest of the operation

Then, tighten scouting intervals in those fields. A practical approach is to avoid treating every field the same. A rotated field with lower residue and faster drying conditions does not need the same urgency as a pivot field with prior tar spot history and frequent leaf wetness.

Scouting should stay focused on lower-canopy and mid-canopy symptom development, but the real decision point is what is happening as fields approach VT and R1. If disease remains low in the canopy and pressure is limited, the best economic move may still be to wait. If favorable weather continues and disease begins threatening the upper canopy or ear-leaf zone, that is when fungicide conversations become more actionable.

Timing for Best ROI

Current multi-state extension guidance continues to support the idea that fungicide timing matters more than simply being early. For tar spot and other foliar diseases, the best return typically comes when applications are made in the VT to R3 window, not during early vegetative growth. Early applications may look proactive, but they often do not persist long enough to protect the crop during the most important grain-fill period and have generally not proven economically viable under university guidance for 2026 conditions.

A simple ROI framework:

  • Too early: Disease is present at very low levels in vegetative corn, mostly low in the canopy, with limited immediate threat to the ear leaf or upper canopy.
  • Best window: VT/R1 through R3 when disease is active, weather remains favorable, and the goal is to protect the upper canopy during the highest-value period.
  • Lower return: Applications made after meaningful upper-canopy disease is already established often lose value quickly.

The best recommendation for growers is to match timing to risk, not anxiety. Protect acres most likely to respond, protect them in the window most likely to return, and avoid broad “insurance” passes that are not tied to field-level disease pressure or crop stage.

EARFULL Talking Point

The disease triangle is starting to form in 2026. Tar spot is already in the conversation, and the next two weeks look supportive enough to raise scouting priority across higher-risk corn acres. The best ROI move today is not automatic early fungicide. It is a strategic field ranking, closer scouting, and preparation to act in the VT/R1 to R3 window, where foliar disease protection has the best chance to pay.

References

The Earfull June 22, 2026

What Needs Attention Right Now

By this point in June, the crop has usually settled enough that the overall story starts to look fairly positive from the road. A lot of corn has good color. A lot of soybeans are moving along. Most fields are far enough along that the season feels established rather than uncertain. This is the good news.

The other side of the story is that it’s also the time when averages become less useful. As a whole, the field can still look decent and yet have enough stress pockets, stand variation, root issues, or weed escapes to quietly trim yield potential before anyone fully realizes it. This is why the better agronomy conversations right now are shifting away from broad planting progress and toward a much more practical question: where is the crop beginning to separate inside the field?

Nationally, the crop remains in a generally workable position. USDA condition ratings suggest both corn and soybeans are still holding together reasonably well as we move deeper into June. That is encouraging. But those ratings do not tell the full local story, especially in areas where compaction, variable rainfall, sidewall effects, crusting, uneven emergence, or herbicide timing are now becoming more apparent.

Corn

corn plant

Corn is moving fast enough now that some early-season issues can get masked for a while. A field may have a strong green color from the road and still contain areas where root development is weaker than expected, growth is uneven, or nutrient uptake has been limited by early conditions. In many cases, these are the same places that tend to show up every year: sidehills, worked ends, low spots, compacted zones, or fields where planting conditions were just a little less forgiving than the grower thought at the time.

This is a good week to look beyond color alone. Pale or uneven corn does not always mean the same thing. Sometimes, it is a temporary response to cooler soils or saturated conditions that the crop will largely outgrow. Other times, it is a sign that the root system never fully established itself as it needed to. Or, it could be that nitrogen and sulfur uptake are lagging because the plant has not had ideal conditions to keep pace with rapid vegetative growth.

The main point is to identify whether the pattern is random or repeatable. If the issue lines up with wheel tracks, drainage patterns, soil changes, or known parts of the field, there is usually something useful to learn from it. Those are the fields worth digging. Pull some plants. Check root development. Look for sidewall restriction, shallow roots, crown health, and whether nodal roots are doing what they should at this stage.

Soybeans

Soybeans deserve the same kind of attention right now, even though they can be easier to overlook. A soybean field often has a way of appearing acceptable until you walk farther into it. Once you walk into it, things may begin to stand out more than they did from the road: thinner areas, uneven growth, crusted pockets, ponded spots, or delayed sections.

This is especially true in fields that were planted in less-than-ideal conditions or in those that had an uneven start. In June, soybeans can still compensate for a lot. They compensate best when the stand is more uniform than it first appears and when stress remains relatively limited from this point forward. Where populations have thinned or roots are restricted, the field may still be fine overall, but it deserves a closer look before writing it off as “good enough.”

This is also the point where weed pressure starts becoming more visible. Residual programs that looked solid earlier can begin to lose their edge, and escapes start showing up in the fields that were a little delayed, a little uneven, or simply stretched on timing. That does not mean every field has a major weed problem. It does mean this is the week to identify the acres where weeds are starting to win small battles before they become larger ones.

The Next 7 to 10 Days

For the next week or so, the best use of scouting time is probably not in the cleanest or most even fields. It is in places that feel just a little off. That could be corn that is not quite as uniform as the neighboring field. It could be soybeans that seem a little thinner than expected. It could be fields where the first pass looked good, but you are starting to wonder if weeds are slipping through.

In corn, keep the focus on stand consistency, root strength, and whether stress follows a clear pattern. In soybeans, count viable plants in weaker spots, look at root development, and ensure emerging weed escapes are identified while practical options are still available. This is also a good time to make notes that will matter later. Many of the best decisions in July and August come from observations made now.

There is still a lot of yield potential ahead for this crop. Most acres do not need a dramatic reaction. They need a careful eye, timely walking, and a willingness to investigate the areas that are easy to dismiss when the rest of the field looks fine. This is usually where the most useful answers are found at this time of year.

References

The Earfull June 15, 2026

row of corn seedlings

Heat and Wind: Regional Product Impacts

Corn is moving fast across the Renk sales area, and that fast growth is exposing two different structural issues in the same season: floppy corn and early greensnap, also called brittle snap. They can show up after the same weather pattern, and they can both be blamed on wind, but they are not the same problem. Floppy corn is mainly an anchorage issue tied to nodal root development, while early greensnap is a stalk failure issue tied to rapid growth and storm timing.

That distinction matters right now because some growers are seeing fields lean or flop after wind, while others are seeing plants actually break off in an earlier-than-normal snap window. This year’s crop has advanced quickly enough that both problems can be present at once, sometimes even within the same general geography.

Floppy Corn

Floppy corn, often called rootless corn syndrome, develops when nodal roots fail to anchor the plant well enough as it transitions out of dependence on seminal roots. The field symptom is familiar: corn may look green, healthy, and aggressive from the road, but after a windy day it leans badly or lays over because the crown root system did not establish enough hold in the soil.

This issue usually traces back to conditions around planting and early root establishment. Shallow planting, loose or fluffy seedbeds, rapid drying near the soil surface, crusting, erosion around the row, and compaction that interferes with nodal root development can all leave the plant under-anchored at the exact time it starts adding height quickly.

This is why floppy corn can show up even in fields that otherwise seem to have excellent color and above-average early vigor. In fact, the fast growth itself can make the problem look worse because a taller, rapidly expanding plant puts more leverage on a root system that is not yet fully secured.

In some areas, this season has created a good setup for floppy corn because growth has moved quickly while surface moisture has remained variable. Wisconsin Extension noted that rainfall patterns have been uneven. Stop-and-go moisture can leave the upper root zone unfavorable for nodal root establishment, even when the crop still looks good overall. On plants where the upper inch or two dried down quickly, nodal roots may have struggled to become fully grown and anchor before wind events tested them.

It is also important to remember that floppy corn is not always uniform across a whole field. It often shows up in lighter soils, sidehills, worked ends, compacted zones, or places where the crown area is effectively positioned too close to the soil surface. That patchiness is one reason the problem can be underestimated until a storm, high winds, or even a trip across the field makes the weak-rooted plants obvious.

Product differences may also influence how often floppy symptoms show up and how well plants recover after stress. Environment and planting conditions are still the main drivers, but field experience supports the idea that not every product responds the same way when root establishment is challenged. The encouraging side of floppy corn is that some plants can recover if they receive timely rainfall and are able to push a stronger nodal root system after the stress event.

rows of corn seedlings

Early Greensnap

Alongside floppy corn, some growers are reporting early greensnap after major wind events. This is different from leaning or rootless corn because the stalk is actually broken, usually at or near a node, rather than simply tipping because roots failed to anchor the plant.

What makes this notable in 2026 is the concern is coming from an earlier window than typically thought about by many growers. Agronomy references describe an early greensnap risk period around V5 to V8. This lines up with reports from fields that were around V4 to V6 and entering a rapid structural change when storms came through. Most years, greensnap gets the attention later, from V8 toward tassel, because that is when corn is visibly tall and rapidly elongating.

Not every product responds the same way under the same weather event. Hybrid differences in greensnap susceptibility are real, which is why some fields, products, or placement zones may show more breakage than neighboring acres exposed to a similar storm.

Another part of the discussion is whether herbicide programs may have contributed to some of the early snap reports. The answer is yes. They can be part of the risk picture, especially where growth regulator herbicides were applied during the V5 to V8 period.

This is especially true in a year when crop growth has been so rapid. A field moving quickly through V5 to V8 can already be structurally tender, so any additional stress or hormonal affect from a growth regulator program may help explain why some acres were more brittle than expected when the storm arrived.

Takeaway

The main takeaway this week is that rapid early growth has exposed weak points in more than one way. Floppy corn remains a major part of the story because many plants are being tested before nodal root systems are fully secure, while early brittle snap is surfacing because storms are colliding with corn just as it enters a fragile growth window.

This is why the current season feels different: uneven surface moisture, fast development, high wind events, hybrid differences, and possibly growth regulator timing are all layering together. The best agronomy conversations right now are the ones that separate floppy corn from true stalk snap. Then, work backward through field conditions, product response, and management timing to understand each field’s reaction.

References

The Earfull May 22, 2026

Planting Progress Update

(based on USDA Crop Progress data for the week ending May 17, 2026)

A cooler spring has shaped the 2026 season, but it has not stopped progress across the Renk sales area.
USDA Crop Progress data for the week ending May 17, 2026, show that corn and soybean planting is mostly at or ahead of the 5-year average across both the northern region (MI, WI, MN, ND, SD) and the southern region (IN, IL, IA, NE). However, emergence is still catching up in some of the cooler areas.

This is an encouraging place to be as May turns toward June. The crop is largely in the ground, many acres are emerging on schedule, and the focus is now shifting from simply getting across fields to evaluating stands, watching early growth, and managing the first stresses of the growing season.

Cooler spring, strong finish

This spring has asked for patience. Across much of the Upper Midwest and Corn Belt, cooler temperatures slowed soil warmup and made emergence less uniform in some fields. Overall, the emergence has been surprisingly strong—just slow.

Even with this challenge, planting progress has been impressive. In the northern region, corn planting is ahead of the 5-year average in Minnesota, North Dakota, South Dakota, and Wisconsin, while Michigan is only modestly behind average. Soybean planting follows a similar pattern, with strong progress across most of the region and Michigan still working through a slightly slower pace.

The southern region has been especially efficient whenever conditions opened up. Indiana, Illinois, Iowa, and Nebraska are all ahead of their 5-year averages for both corn and soybean planting, which says a great deal about how quickly growers moved when the weather gave them a window.

The larger story is simple: despite a cool start, Renk growers did a great job getting the crop in the ground. That kind of planting progress helps preserve yield potential and gives fields the best possible chance to benefit from better growing conditions ahead.

Northern region update

The northern region includes some of the areas most affected by cool soils, but the planting pace still stands out. Minnesota, North Dakota, and South Dakota are all well ahead of their 5-year averages for both corn and soybean planting, while Wisconsin is also slightly ahead on both crops.

Michigan has been the main exception, running a bit behind average on both corn and soybean planting. Even so, the state is not dramatically off pace, and the gap is small enough that a few favorable days can quickly improve the overall picture.

Emergence in the North reflects that same weather story. Corn and soybean emergence is at or ahead of average in Minnesota, North Dakota, and South Dakota, while Michigan and Wisconsin are still a bit slower as cooler soils delay early growth.

For growers in the northern region, this is a good reminder that planting pace and emergence pace are not always the same thing. Fields that were planted on time may still need a careful look for uniformity, depth consistency, crusting issues, or seedling stress before they fully settle into the season.

Southern region update

The southern portion of the Renk sales area has made strong use of planting windows. Indiana, Illinois, Iowa, and Nebraska are all ahead of the 5-year average for corn planting, and all four states are also ahead of average for soybean planting.

That level of progress matters because it gives the crop a timely start. When planting is completed near or ahead of normal, management attention can shift sooner toward emergence checks, stand quality, herbicide performance, and early-season crop development rather than simply racing against the calendar.

Emergence numbers in the southern states are also encouraging. Corn emergence is at or above average across most of the region, and soybean emergence is also generally ahead of the 5-year average, suggesting that many acres are moving from planted to established in a favorable way.

This does not mean every field is perfect. A fast planting season can create sidewall issues, uneven depth, or localized ponding damage, so the next pass through the field remains important. Still, the regional data suggests the crop is entering the growing season from a strong position.

State-by-state snapshot (based on USDA Crop Progress data for the week ending May 17, 2026)

State

Corn planted

5-year average

Corn emerged

5-year average

Soybeans
planted

5-year average

Soybeans emerged

5-year average

Michigan

47%

52%

3%

15%

37%

46%

2%

13%

Wisconsin

62%

59%

13%

18%

54%

50%

9%

13%

Minnesota

86%

74%

36%

33%

74%

53%

22%

14%

North Dakota

58%

40%

13%

9%

41%

28%

5%

2%.

South Dakota

81%

65%

22%

21%

59%

46%

10%

8%

Indiana

67%

57%

42%

29%

67%

50%

42%

23%

Illinois

75%

73%

46%

46%

74%

63%

44%

35%

Iowa

88%

82%

46%

43%

80%

68%

28%

25%

Nebraska

82%

79%

42%

39%

81%

65%

33%

24%

What to watch now

With most of the crop planted, the next two weeks become highly valuable. This is the time to check whether emergence is even, evaluate stand counts against expectations, and identify any fields where cool conditions, wet spots, crusting, or seedling stress may require closer management.

A few agronomic priorities stand out right now:

  • Evaluate stand uniformity, not just population, because uneven emergence can reduce yield even when final stand counts look acceptable.
  • Watch fields planted in marginal conditions for sidewall compaction, restricted roots, or inconsistent early vigor.
  • Revisit low spots and variable soils first, since those are often the areas where cool spring conditions show up most clearly.
  • Keep weed control timing tight, especially as fields move from planting season into rapid early vegetative growth.

Even with a cooler-than-normal start to spring, Renk growers across both the northern and southern regions made excellent planting progress and were timely getting the 2026 crop in the ground.

Now the season enters its next phase. Emergence, stand establishment, and early-season scouting will shape how well this fast planting pace turns into strong crop performance through the rest of the growing season.

References

 

No post found

smart post preloader

No post found

No post found

smart post preloader

No post found

smart post preloader

No post found

smart post preloader

No post found

smart post preloader

No post found

smart post preloader

No post found

No post found

smart post preloader

No post found

smart post preloader

No post found

smart post preloader